Atheronix.

Home › Appliances

How much does an iron cost to run?

CSE uses 1,500 W as an average for a household iron. An iron has a thermostat: it draws full power while the soleplate heats up, then switches on and off to keep it at the chosen temperature. Steam generator irons, which have a separate water tank and boiler, are often rated higher; check the plate on yours.

At full power, a 1.5 kW iron costs about 39p an hour (1.5 kWh × 26.32p/kWh).

Typical running costs

Example usekWh/dayPer dayPer monthPer year
30 minutes a week 0.11 2.8p 86p £10.29
1 hour a week 0.21 5.6p £1.72 £20.59
3 hours a week 0.64 17p £5.15 £61.76

Based on 1,500 W (CSE average rating) and 26.32p/kWh, the Ofgem price cap average Direct Debit unit rate for 1 October – 31 December 2026. Usage patterns are examples. Standing charges are excluded.

Calculate your iron cost

Per day–
Per week–
Per month–
Per year–
Energy per day–

Starts at 26.32p/kWh, the Ofgem price cap average Direct Debit unit rate for 1 October – 31 December 2026. Use the unit rate on your own bill for a better estimate. Standing charges are not included.

An hour of ironing

If the element ran continuously, an hour of ironing at 1,500 W would use 1.5 kWh, costing 39p at the current reference rate. Because the thermostat cycles once the iron is hot, the real figure is usually lower, especially at low temperature settings for delicate fabrics.

Less time hot

The iron uses energy for as long as it is switched on, whether or not you are pressing anything. Ironing in one session instead of several, starting with low-temperature fabrics while the iron warms up, and switching off a few minutes before the end (the soleplate stays hot) all reduce the time the element runs.

Taking clothes out of the washing machine or dryer promptly and hanging them up reduces creasing, so some items need little or no ironing.

Measuring and comparing irons

Irons plug in, so a plug-in energy monitor shows what a real ironing session uses, including the time the iron spends switched on between garments. Steam generator irons heat water in a separate boiler as well as the soleplate, so compare models by measuring a session or by their rated power.

Questions

How much does it cost to iron a shirt?

If one shirt takes five minutes at full power, that is 0.125 kWh, about 3.3p at the current reference rate. With thermostat cycling it is usually less.

Does the temperature setting matter?

Yes. At lower settings for synthetics and delicates, the thermostat switches the element off more often, so the iron uses less energy per minute.

Is it cheaper to iron in one big batch?

Yes. Every session starts with the soleplate heating from cold, so fewer, longer sessions use less energy than many short ones.

Related

Sources